CopterX Model CX-3X1000 RC Helicopter 3 Axis Flybarless Gyro Combo Set + Card CB070

New Arrival! CopterX Model CX-3X1000 RC Helicopter 3 Axis Flybarless Gyro Combo Set + Card CB070


CopterX Model CX-3X1000 RC Helicopter 3 Axis Flybarless Gyro Combo Set + Card CB070
Available at www.hobbyhot.com - ship to worldwide
Available at www.hobbyhot.com - ship to worldwide

Introduction Thank you for your purchase of CopterX high performance 3 axis gyro CX-3X1000. With compact design, micro processor, anti vibration aluminum alloy casing, easy to use setup box, and future firmware update available via PC. Make this one of the most advance 3 axis gyro which will work with anything from EP100 to large scale nitro Helicopter-3-Axis-Flybarless-Gyro-Combo-Set-Card-CB070.html>helicopter. Please keep a copy of this manual for future reference. Enjoy the high performance flight offer by CopterX CX-3X1000 gyro system. Specification Operating voltage: DC 3.5V-9V Operating current drain: 60mA Operating temperature: -15 ~65 Maximal angular velocity: 800 degrees/sec Tail servo compatibility: 1.52ms analog, 1.52ms digital, 760us digital, 960us digital Swash plate servo compatibility: 1.52ms analog servo, 1.52ms digital servo Radio compatibility: PPM, PCM, 2.4G Supporting firmware upgrade Supporting Multi-Blade Rotor Head Dimensions: 37.2 x 25.2 x 13mm Weight: 20g Specifications of the Gyro program card Operating voltage: Data port: DC 4.8V-12.6V Servo port: DC 4.8V-12.6V Servo power: DC 4.8V-12.6V Battery measure port: 4.8V-33.6V (2-8S Li-Po, Li-Ion, Li-FePO4, Li-Mn) Operating current drain: 150mA Operating temperature: -20 -70 Servo compatibility: 1.52ms analog servo, 1.52ms digital servo, 760us digital servo Specifications of the Gyro USB Cable Model: CopterX CX-PB002 USB Programming Cable Cable Length: 200mm Port Type: USB Suitable Model: CX-3X1000 & CX-1X1000 Gyro   Package Content Copter Model CX-3X1000 RC Helicopter 3 Axis Flybarless Gyro GY080 x 1 Copter Model CX-PB001 Gyro Program Box for CX-3X1000 Flybarless Gyro GP595 x 1 CopterX RC Model CX-PB002 Gyro Programming Cable for CX-3X1000 Gyro GP590 x 1

Remote Controlled Toys Online Shop: www.hobbyhot.com
We highly recommend the follow RC TOYS model, We accept Wholesale order worldwide, We also sell onEBAY.COMaccept PAYPAL and Credit Card
LEOPARD Boat 3674 KV1300 4 Poles Brushless Motor BL121 USD66.30 only
RCS 2080mAh 7.4v 20C LiPo Li-Polymer Battery RB690 USD13.00 only
Walkera HM-59DQ-Z-23 Main Frame Set USD5.90 only
Carbon Fiber 288mm Helicopter Main Blade (1pair) MB390 USD12.40 only
HOBBY HOT Tuned Exhaust Pipe + Header for 1/10 Car SO060 USD9.20 only
RC 2000KV Brushless Motor 90mm RC Jet Golden Ducted Fan OM357 USD41.60 only
Futaba FASST R604FS 4 Channel 2.4GHz 4PK Receiver RF003 USD116.10 only
CX450-02-05 Drive Belt USD4.70 only
Corona DS-919MG Digital Metal Gear Servos SO041 USD10.60 only
HOBBYWING eZRun 3279KV 12T V2 RC Brushless Motor + 25A ESC EC080 USD64.00 only
Flyermate 25A Electric Brushless Speed Controller (1/18, 1/16) USD30.70 only
LEOPARD Boat 2860 KV3400 4 Poles Brushless Motor BL134 USD54.10 only
HOBBYWING 17T 5mm Shaft Steel Pinion Motor Gear GB009 USD4.90 only
Walkera HM-LA2-Z-05 Skid landing USD3.10 only
Walkera HM-59DQ-Z-41 Radio USD75.60 only
RCS Model Bearing Set for Kyosho RC SIDEWAYS / ULTIMA II / OUTLAW TRUCK BG085 USD9.90 only
LEOPARD 1924KV RC Brushless Motor 90mm 6B1 EDF OM118 USD119.20 only
Walkera HM-004-Z-08 Tail Gear USD2.80 only
JXD RC Model 3ch Red Gyro LED Infrared Mini Helicopter RTF RH059 USD21.30 only
HOBBYWING XERUN 5.5T 6000Kv Sensored Brushless Motor for 1:10 RC Car BL154 USD59.90 only

5 x RC Model SG91R Metal Gear Speed & Torque R/C Hobby Micro Servo CB073

New Arrival! 5 x RC Model SG91R Metal Gear Speed & Torque R/C Hobby Micro Servo CB073


5 x RC Model SG91R Metal Gear Speed & Torque R/C Hobby Micro Servo CB073
Available at www.hobbyhot.com - ship to worldwide
Available at www.hobbyhot.com - ship to worldwide
Specifications of RC Model SG91R Servo

Dimensions: 23 x 12.2 x 28.5mm

Net Weight: 13.8g

Operating Speed (4.8V no load): 0.10sec / 60 degrees

Operating Speed (6.0V no load): 0.08sec / 60 degrees

Stall Torque (4.8V): 1.8 kg/cm

Stall Torque (6.0V): 2.0 kg/cm

Temperature Range: 0 to + 55 degree C

Dead Band Width: 10us

Operation Voltage: 4.8 - 6.0 Volts

Recommend Model: Mini Car / Mini Ship / Helicopter & Airplane

Features 

- Metal Gear

- Full Ball Bearing

- Light Weight

- Less Noise

Package Content
RC Model SG91R Metal Gear Speed & Torque R/C Hobby Micro Servo + Servo Arms x 5 Set

New Arrival! EMAX CF2812 1580Kv Outrunner Brushless Motor + Skywalker ESC 40A CB072


EMAX CF2812 1580Kv Outrunner Brushless Motor + Skywalker ESC 40A CB072
Available at www.hobbyhot.com - ship to worldwide
Available at www.hobbyhot.com - ship to worldwideSpecification of EMAX CF2812 Brushless ESC-40A-CB072.html>ESC-40A-CB072.html>Motor 

Rotational Speed 1580 RPM/V 

Continuous Current 16A 

Max. Current 20A 

Input Voltage 6 - 18V 

Max. Efficiency 96% 

No Load Current 0.7A 

Internal Resistance 55m|

ESC-40A-CB072.html>ESC-40A-CB072.html>Motor Dimensions (Diameter x Length) 28mm x 17.9mm 

Shaft Dimensions (Diameter x Length) 2.97mm x 13.2mm 

Input ESC-40A-CB072.html>ESC-40A-CB072.html>Motor-Skywalker-ESC-40A-CB072.html>ESC-40A-CB072.html>Battery Types NiCd/ Nimh/ Li-po ESC-40A-CB072.html>ESC-40A-CB072.html>Motor-Skywalker-ESC-40A-CB072.html>ESC-40A-CB072.html>Battery 

Recommend Model Airplane 

Specifications of Hobbywing SkyWalker 40A ESC-40A-CB072.html>ESC

Model: Skywalker-40A

Continuous Current: 40A

Burst Current (>10s): 55A

BEC Mode: Linear

BEC Output: 5V2A

BEC Output Capability: 5 Servos (2S Lipo) / 4 Servos (3S Lipo)

ESC-40A-CB072.html>ESC-40A-CB072.html>Motor-Skywalker-ESC-40A-CB072.html>ESC-40A-CB072.html>Battery Cell: 2-3S (Lipo) / 5-9 cells (NiMH)

Net Weight: 35g

Dimension (L x W x H): 68 x 25 x 8mm

Features

Use top quality components to get strong current endurance.

Low voltage cut-off protection / over-heat protection / throttle signal loss protection.

3 start modes: Normal / Soft / Super-Soft, compatible with fixed-wing aircraft and ESC-40A-CB072.html>ESC-40A-CB072.html>Motor-Skywalker-ESC-40A-CB072.html>ESC-40A-CB072.html>helicopter.

Smooth, linear and precise throttle response.

Maximum ESC-40A-CB072.html>ESC-40A-CB072.html>Motor-Skywalker-ESC-40A-CB072.html>ESC-40A-CB072.html>motor speed: 210000 PRM (2 poles), 70000 RPM (6 poles), 35000 RPM (12 poles). 

* All of the above information and pictures are reference only. Color may be changed.

Package Content
EMAX CF2812 1580Kv Outrunner Brushless ESC-40A-CB072.html>ESC-40A-CB072.html>Motor  x 1
HOBBYWING SKYWALKER 40A RC ESC-40A-CB072.html>ESC-40A-CB072.html>Motor-Skywalker-ESC-40A-CB072.html>ESC-40A-CB072.html>Brushless Speed Controller ESC-40A-CB072.html>ESC x 1


New Arrival! HOBBYWING EZRUN WP SC8 Waterproof 120A Brushless ESC Speed Controller + Card CB071


HOBBYWING EZRUN WP SC8 Waterproof 120A Brushless ESC Speed Controller + Card CB071
Available at www.hobbyhot.com - ship to worldwide
Available at www.hobbyhot.com - ship to worldwideThis combo comes with a LED program card which you can set up the ESC-Speed-Controller-Card-CB071.html>ESC easily!

Specification of HOBBYWING EZRUN WP SC8 Waterproof 120A Brushless ESC-Speed-Controller-Card-CB071.html>ESC

Model: EZRUN-WP-SC8

Dimension: 59.3mm(L) x 38.4mm(W) x 33.6mm(H)

Cont. / Burst Current: 120A / 760A

Resistance: 0.0004 ohm

Suitable Car:

1/10 SCT /Truggy / Buggy / Monster

1/8 SCT / Buggy(Includes TRAXXAS 1/10 Truggy and Buggy)

Suitable ESC-Speed-Controller-Card-CB071.html>ESC-Speed-Controller-Card-CB071.html>Motor: Sensorless Brushless ESC-Speed-Controller-Card-CB071.html>ESC-Speed-Controller-Card-CB071.html>Motors

Suitable ESC-Speed-Controller-Card-CB071.html>ESC-Speed-Controller-Card-CB071.html>Motor Turns:

2S Lipo: KV<=6000, 3S Lipo: KV<=4000, 4S Lipo: KV<=3000

ESC-Speed-Controller-Card-CB071.html>ESC-Speed-Controller-Card-CB071.html>Battery: 6-12 cells Ni-xx (NiMH/ NiCd)?or 2-4 cells (Li-Po)

BEC Output: 6V/3A?(Switching mode built-in BEC)

Net Weight: 113g (with 12AWG 200mm *5 wires)

Features

Completely water-proof and dust-proof. The ESC-Speed-Controller-Card-CB071.html>ESC works properly even under water.

(Please remove the cooling fan when running car in water, and after running, please make the ESC-Speed-Controller-Card-CB071.html>ESC clean and then dry it to avoid the oxidation of copper connectors)

Excellent start-up, acceleration and linearity features, suitable for truggy (especially short course trucks) and buggy.

The built-in switching mode BEC of EZRUN-SC8 ESC-Speed-Controller-Card-CB071.html>ESC has a powerful output to supply all electronic equipments even with 4S Lipo Input.

Integrated and compact design, very suitable for trucks (especially short course trucks) and buggies.

There is a mounting stand for installing the ESC-Speed-Controller-Card-CB071.html>ESC on chassis easily and firmly.

Proportional ABS brake function with 5 steps of maximum brake force adjustment, 8 steps of drag-brake force adjustment and 4 steps of initial brake force adjustment. Also compatible with the mechanical disc-brake system.

Multiple protection features: Low voltage cut-off protection /Over-heat protection / Throttle signal loss protection /ESC-Speed-Controller-Card-CB071.html>ESC-Speed-Controller-Card-CB071.html>Motor blocked protection.

Easily program with the SET button of the ESC-Speed-Controller-Card-CB071.html>ESC, and also compatible with Pocket-sized Program Card and the advanced LCD Program Box (Optional Equipment).

Special program port for connecting to the LED Program Card or the LCD Program Box. User needn`t unplug the Rx lead from receiver when programming the ESC-Speed-Controller-Card-CB071.html>ESC.

Specification of the LED program card

Size:  88mm (L) * 58mm (W) * 14mm (H)

Weight:  40g.

Input Voltage:  4.8-6V (If the ESC-Speed-Controller-Card-CB071.html>ESC hasn’t a built-in BEC, you must use an additional ESC-Speed-Controller-Card-CB071.html>ESC-Speed-Controller-Card-CB071.html>battery pack to supply the program card)   

Programmable Items

  The programmable items  (Available for XERUN and EZRUN series car ESC-Speed-Controller-Card-CB071.html>ESC of Version2) 

#1    Running Mode 

#2    Drag Brake Force

#3    Low Voltage Cut-Off Threshold 

#4    Start Mode 

#5    Maximum Brake Force

#6    Maximum Reverse Force 

#7    Initial Brake Force 

#8    Throttle Neutral Range 

#9    Timing 

#10  Over-Heat Protection 

#11    ESC-Speed-Controller-Card-CB071.html>ESC-Speed-Controller-Card-CB071.html>Motor Rotation 

#12    Lipo Cells

(Note: The item #11 and #12 are not available for XERUN series ESC-Speed-Controller-Card-CB071.html>ESC of Version 2, they only available for EZRUN series ESC-Speed-Controller-Card-CB071.html>ESC)   

Package Content
HOBBYWING EZRUN WP SC8 Waterproof 120A Brushless ESC-Speed-Controller-Card-CB071.html>ESC x 1
HOBBYWING LED Program Card PC2C for Xerun Ezrun Series Car ESC-Speed-Controller-Card-CB071.html>ESC x 1


Remote Controlled Toys Online Shop: www.hobbyhot.com
We highly recommend the follow RC TOYS model, We accept Wholesale order worldwide, We also sell onEBAY.COMaccept PAYPAL and Credit Card
LEOPARD 3650 8.5T KV4450 Sensored Brushless Motor IM046 USD54.20 only
LEOPARD 4370KV RC Brushless Motor 68mm 3B1 EDF OM124 USD86.50 only
RCS Model MR106ZZ High Precision Bearing (6x10x3mm, 10pcs) CS771 USD5.90 only
Flyermate Black Label 11.1v 5000mAh 30C Li-Polymer Battery Combo USD129.01 only
RC Ship 38x32mm Water Stabilizer Boat Trim Tab SO049 USD8.80 only
AEO RC Model Input 9-23V Output 9V/2.5A 7.8g R/C Hobby UBEC BEC AC914 USD6.90 only
Ultimate EP Electric Plane Kit (Purple/Yellow) USD99.90 only
Walkera HM-4#3-Z-12 Battery Frame USD1.40 only
APC Thin E 6 x 5.5 Electric RC Airplane Composite Propeller PA011 USD3.40 only
HOBBYWING Pentium 100A-HV ESC High Voltage V4.1 EC046/100AHV USD102.00 only
Melting EP Electric Plane Kit USD94.50 only
ZOP 1500mah 11.1v 25C LiPo Li-Polymer Battery RB082 USD12.00 only
O.S. 79884261 Engine Motor Sports Decal AC105 USD6.80 only
Walkera HM-4#3Q-Z-10 Main Frame USD6.60 only
Hobbymate HB2626 4200Kv Outrunner Brushless Motor for RC Helicopter BL033 USD14.50 only
AEO Model 1550KV Contra-rotating Brushless Motor for RC Airplane BL083 USD50.70 only
AEO 8100KV Brushless Motor 40mm RC Ducted Fan EDF DF014 USD16.30 only
MASTER AIRSCREW 16 x 6 Beechwood (Square Tip, Sport Prop) PM014 USD14.60 only
SH ENGINES Model 18 Nitro Engine 2.74cc for RC Car Buggy Truck Truggy EG630 USD52.10 only
RCS Model HF1012 One Way Needle Roller Bearing (10x14x12mm, 10pcs) CS184 USD16.90 only

Corona/HobbyCity halt FHSS sales after RC Model Reviews' tests reveal bugs

Source:  http://www.rcmodelreviews.com/coronafhssissues.shtml

As soon as I hooked up the Turnigy 9X transmitter module and receivers I purchased from HobbyCity (aka Hobby King) I knew there were problems.

Slow stick deflections produced jerky and jerky movement of the servos

I checked with several different types and brands of servos but the results remained unchanged.

On several occasions I also observed uncommanded movements of one or more servos.

Closer investigation pointed to an issue with the amount of processor power available to perform the various tasks required in such an application and the way the system was hopping.

To cut a long story short, I sent my observations and suspicions as to their cause to Corona and they confirmed them.

Corona has now had a couple of tries at producing a frequency-hopping spread-spectrum system and they've still got work to do.

The current version is close -- but still has some critical issues that really need to be remedied before I could recommend it for safe flying.

The Issues

1. Random/high Latency
A key cause of the erratic and jerky servo-movements associated with slow stick deflections is the very slow data-refresh rate between transmitter and receiver.

In a normal FM radio, the servo position data is sent 50 times per second but in the case of the Corona, even though the transmitter still produces information at this rate, it appears only to be sent to the receiver at a lower rate. In effect, the system is dropping some of the data.

What causes this random/high latency?

It appears that the microcontroller (MCU) chosen by Corona to perform the various tasks required simply doesn't have enough steam to keep up with all those jobs. As a result, it processes only some of the data-frames.

What is the effect to your flying?

If you fly relatively slow sport-type planes then you may never notice the jerkiness and latency this problem creates. However, if you fly very fast models or airplanes with large surfaces/throws (such as used for 3D) then you'll almost certainly find the results undesirable.

2. Uncommanded servo movements
I've not discovered the exact cause of these but they may well also be linked to the overstressed MCU. Because there is only so much processing power available and so much of the work is time-critical, there's a very good chance that every now and then the processor is asked to do two things at once. Clearly it can't do two things at *exactly* the same time and this manifests itself as a slightly stretched servo-pulse or two -- resulting in an uncommanded servo movement.

Corona themselves have confirmed the existence of the bug.

3. Failure to relink
When testing for the lowest voltage at which the receiver would continue to operate, I discovered that sometimes the receiver will simply "go to sleep" and not relink with the transmitter, even once full operating voltage was restored. This is clearly not a good thing.

If you are flying a model with a weak BEC or battery, it's quite possible that the receiver could enter this state when heavy servo loads are experienced.

4. Loss of RF link
It very much appears as if the Corona's FHSS receiver can be confused to the point of losing all contact with the transmitter if/when only a relatively small portion of the band is subjected to high noise levels.

Although there may be as much as 75% of the band unaffected, and although the transmitter continues to hop across that unaffected part of the band, the receiver is unable to extract valid data and all control is lost.

One of the key benefits of a frequency-hopping system is that it should be able to make use of even the smallest interference-free window within the band, the Corona can not. This may be attributed to the receiver processor being overloaded as it attempts to decode the noise as a valid signal -- thus leaving no time for hopping or other essential tasks.

The Bottom Line

People, including myself, have successfully flown the Corona/Turnigy FHSS system so you might ask "are these issues really important?"

The bottom line is that the system does work under average to ideal conditions.

If you fly slow/sport-type models in a noise-free environment with well-charged batteries and/or a decent BEC you may never encounter the effects of these issues.

It's worth remembering that we're talking about a module and receivers that cost only $20 or so. This is not a Futaba FASST system costing hundreds, it is a very bottom-end product with (in its current form) significant limitations. If you are prepared to accept that then you may find the Coronal/Turnigy FHSS system adequate and acceptable value for money.

However, the 2.4GHz band is becoming increasingly busy, not only with RC systems but with all manner of other consumer electronics. A park or flying-site that is relatively quiet today may become noisy enough to cause problems for the Corona/Turnigy FHSS system tomorrow.

Corona are therefore to be highly commended for their decision to withdraw this system from sale until such time as they have remedied the problems. They responded promptly to the issues I uncovered and forwarded to them and that's a responsible move on their part.

Likewise, HobbyCity's offer to refund (less postage) any modules/receivers returned is a reasonable one.

I certainly hope that Corona receiver do sort their issues, the hobby really does need as many good, reliable, robust and well-priced 2.4GHz systems as it can get.

Choosing the right OS glow plug

Getting the best engine performance means choosing the right glow plug, which depends on a number of different factors – the engine type, air–fuel mix, nitro percentage, and even air temperature.

What's more, the right glow plug will change as conditions change. Keeping a range of glow plugs on hand will help you fine–tune glow heat and enjoy maximum performance under all conditions.

Generally, hot plugs provide better idle and acceleration than cold plugs. Cold plugs will produce more power but may idle more roughly and be harder to tune.

For more OS Engine Product, visit  http://www.hobbyhot.com/OS-Engine/

#6	Hot	OSMG2690	A long-lasting plug for most .10-.60 2-strokes
P3	Ultra Hot	OSMG2699	For 21VZ-B V-Spec and most .18-.28 off-road racing Turbo head engines
P4	Super Hot	OSMG2697	For 21VZ-B V-Spec and most .18-.28 off-road racing Turbo head engines
P5	Very Hot	OSMG2711	For 21VZ-B V-Spec and most .18-.28 off-road racing Turbo head engines, especially when the temperature is high or for leaner needle settings and high-nitro/high-rpm running
LC3	Hot	OSMG2700	Long reach, for 1/10 scale off-road engines such as O.S. 21TMs and Traxxas® peak needle settings and punchy throttle response
#7	Medium Hot	OSMG2713	For 2-stroke airplane, helicopter and car (except Turbo head) engines. Offers stable idling, broad peak needle settings and punchy throttle response
RP6	Medium	OSMG2703	For most .12-.21 on-road racing Turbo head engines
LC4	Medium	OSMG2708	Long reach, for 1/10 scale off-road engines such as O.S. 21TMs and the Traxxas TRX2.5 & 3.3™ engines
#8	Medium	OSMG2691	A favorite for most 2-stroke engines
RP7	Cold	OSMG2704	For most .12-.21 on-road racing Turbo head engines
RP8	Cold	OSMG2715	Outlast the hottest heats with Turbo head engines
#10	Cold	OSMG2693	Ideal for aircraft engines .60-size and up
R5	Cold	OSMG2694	For leaner needle settings and high-nitro/high-rpm scale racing
F	4-Stroke	OSMG2692	Long reach and long life for 4-stroke engines

SKYRC TORO 1-2 Cell RC Sensored Brushless Motor 120A ESC Speed Controller SL780

New Arrival! SKYRC TORO 1-2 Cell RC Sensored Brushless Motor 120A ESC Speed Controller SL780


SKYRC TORO 1-2 Cell RC Sensored Brushless Motor 120A ESC Speed Controller SL780
Available at www.hobbyhot.com - ship to worldwide
Available at www.hobbyhot.com - ship to worldwide

ESC-Speed-Controller-SL780.html>ESC Specifications
Model: TORO 1 Cell
Dimensions without fan (Length x Width x Height):?36.5 x?42 x 18mm (1.44 x 1.65 x 0.71in.)
Continuous / Burst Current: 120Amp / 760Amp
Input Power (Cells): 1-2S LiPo/LiFe, 3-6 NiMH (8.4V Max.)
ESC-Speed-Controller-SL780.html>ESC-Speed-Controller-SL780.html>Motor Type: Sensored and Sensorless Brushless ESC-Speed-Controller-SL780.html>ESC-Speed-Controller-SL780.html>Motor
BEC Output (Support 1S & 2S LiPo): 6.0Volts 1Amp, built-in BEC
Controls: Rev/Brk or Fwd/Fwd
Status LED: White LED, 3 Color LED (Red, Green & Orange)
Thermal Overload Protection: Yes
Weight (without wires) 34g (1.20oz)

ESC-Speed-Controller-SL780.html>ESC-Speed-Controller-SL780.html>Motor Limits
1 LiPo or 3-4 NiMH: =>3.5T (1/12 on-road)
2 LiPo or 5-6 NiMH: =>4.5T (1/10 on-road), =>6.5T (1/10 off-road)


Remote Controlled Toys Online Shop: www.hobbyhot.com
We highly recommend the follow RC TOYS model, We accept Wholesale order worldwide, We also sell onEBAY.COMaccept PAYPAL and Credit Card
HOBBYWING SKYWALKER 40A RC Brushless Speed Controller ESC EC137 USD10.80 only
RCS Model 607-2RS High Precision Bearing (7x19x6mm, 10pcs) CS706 USD7.90 only
RCS Model Bearing Set for TEAM ASSOCIATED RC RC10B4 BG403 USD9.90 only
Prolux RC Model Hand Fuel Pump AC257 USD12.60 only
RCS Model FR2-5ZZ High Precision Bearing (3.175x7.938x3.571mm, 10pcs) CS420 USD9.90 only
LEOPARD HOBBY 47x68mm RC Motor Water-Cool Kit AC253 USD11.60 only
HOBBYWING Brushless Motor 100A Programable ESC EC135 USD101.90 only
RCS Model 684 High Precision Bearing (4x9x2.5mm, 10pcs) CS680 USD5.90 only
RCS Model HF1216 One Way Needle Roller Bearing (12x18x16mm, 10pcs) CS180 USD18.90 only
Swanghobby A-10A-10 Warthog Warbird Plane Kit USD99.90 only
CopterX 6 Channel CX-CR6A Receiver USD29.90 only
CopterX CX450 Black Angel Helicopter Kit RH036 USD255.80 only
Walkera HM-5G4Q3-Z-06 Swashplate Guide Frame USD3.10 only
RC Ship Flex Collet 3 / 3.6mm Boat Metal Coupler SO052 USD4.40 only
Flyermate 450 Class Glass Fiber Cabin Canopy (White) HC034 USD10.50 only
Corona DS-939MG Digital Metal Gear Servo SO038 USD10.80 only
RC Air Clown Fish Remote Control Flying Fish Airship Toy (Complete Set) AS180 USD14.60 only
RC Airplane Wheel Tires Diameter 76mm 2.98 Inch WH803 USD2.40 only
Walkera HM-4#3Q-Z-12 Main Gear USD4.30 only
Walkera HM-59DQ-Z-42 Rotor Head Set USD35.50 only

Fly Sky FS-TH9X Transmitter Review

The 2.4 GHz price wars are really heating up at the moment now that many Chinese manufacturers have entered the market. For the past few years there have been various 2.4 GHz modules coming out of China, with some decent offering from Corona and Assan, now it seems like the Chinese want to make a name for themselves by offering full systems. The Fly Sky FS-TH9X is the first offering that I decided to check out.

I am a diehard Futaba Fasst fan but I am tired of having to sell a kidney or take out a second mortgage every time I have to buy a new receiver for my fleet. The Fly Sky offerings drew my attention with their sub $20 receivers. The Fly Sky FS-TH9X is offered under various brand names but it is basically the same transmitter.

The Fly Sky FS-TH9X is modular system, so specifications may vary depending on the module you select. The transmitter itself is loaded with features, some of which you will usually only find on some high end transmitters.

• Number of Channels: 8ch PPM/9ch PCM
• Display: 128*64 LCD
• Support Type: Heli/Acro/Glid
• User Models: 8
• Stick Modes: 4
• Encoder Type: PPM/PCM
• Sub Trim: Yes
• Simulator Interface: Yes
• Buzzer: Yes
• Low Voltage Display: Yes

The menus are clearly and easy to navigate using the 128×64 pixel LCD display. The only issue I had was that the +/- buttons are back to front with the positive on the left.

When the package arrived I was pleasantly surprised by the attention of detail that Fly Sky went to. Everything looked very professional, that was until I saw the manual. Let me start by saying that the manual is probably the worst Chinglish I have ever seen, luckily the transmitter is easy enough to program without it.

The actual layout of the transmitter is quite nice too; there is a vast array of switches for selecting rates, gear, trainer-mode, flight modes, etc. These are complimented by three knobs which serve for flaps, hover pitch, etc.

From online reports I know that the quality control for these transmitters can vary greatly. The first one I received simply wouldn’t allow me to access the menus. The second one has been with me for a few months now and is still going strong.

One major thing to note is that the amount of channels will vary depending on whether you use PPM or PCM. Switching to PPM reduces the number of available channels to only 8.

The package that I purchased included the transmitter and transmitter module but no receivers. Luckily I had planned ahead and ordered both the 6 channel and 8 channel receivers from Hobby King. One you have everything the setup is extremely easy. Simply bind the receiver to the transmitter by putting the bind plug in the receiver and powering on your transmitter while holding in the bind button. All the receivers I bought were bound without any problems.

Once you have bound the receiver to the radio, it’s time to program the radio to suit your model. Pay careful attention to servo reversing and also the transmitter’s mode selection.

And now we will move on to the actual performance. I wasn’t expecting too much from this transmitter, so I was pleasantly surprised by its excellent performance. I could easily fly my helicopter to the very limits of my vision without any glitches. On a 450 size helicopter that means I could take it out about 300 metres on a 500 size helicopter I was able to go to nearly 400 metres before I started to get nervous, not because of the transmitters performance but rather because it became difficult to tell the orientation of the model. The first few flights I was actually expecting glitches, so I only used it on a few electric powered helicopters but now I feel comfortable enough to use it on my whole fleet.

The Fly Sky FS-TH9X is an excellent radio for the price. If you are on a limited budget and looking to upgrade to 2.4 GHz then I highly recommend you take a look at it. If you already have a Futaba/JR/Hitec radio then this will make an excellent backup or get up and go radio. At under $100 for a complete combo it doesn’t really matter if you knock or drop it.

One major problem is that when you are using PPM the 8 Channels means there is a lack of a failsafe option. This might prove a problem if you are flying very fast or dangerous models. But for smaller helicopters and aircraft I don’t see this being a big consideration.

Positives

• Affordable
• Easy to Program
• Module Flexibility

Negatives

• No Failsafe
• Only 8 Model Memories
• Quality Control Issues

As I said earlier, the Fly Sky FS-TH9X is available under various brands, Imax, Turnigy, Eurgle etc. Hobby King ‘s Turnigy 9X is now in its 3rd revision and at under $70 I highly recommend you check it out.

Source: http://www.helireviews.com/fly-sky-fs-th9x-9ch-transmitter/
You can buy FlySky Transmtiter at www.hobbyhot.com

TOP 5 Online RC Model Shop

TOP #1
Hobby King.com

http://www.hobbyking.com

TOP #2

HobbyHot.com

http://www.hobbyhot.com

Sell Hobbywing ESC, Xerun Ezrun series, Walkera Mini Helicopter, Leopard Brushless Motor,

digital servo, li-polymer and RC related product. Promising delivery and good customer service.

Based in Hong Kong.

TOP #3

RCECHO.com

http://www.rcecho.com

Deal with TAMIYA and Hobbywing products, Hong Kong based company, fast delivery and cheap price.

TOP #4
Hobbypartz.com

Quick shipping and various product available, mainly lipolymer battery.

TOP #5
Walkera Helicopter.com
http://www.walkera.com.hk/

Mostly sell walkera helicopter, it is the main store of walkera products from China.

TOP 10 Online RC Model Shop